Using the Operation Mode ................19 Adjusting the Fan Speed .................20 Using the Extra Functions ................21 Knowing the Air Quality ...................22 SMART FUNCTIONS ..............25 Using LG SmartThinQ Application ..............25 Using Smart Diagnosis™ ................27 MAINTENANCE ................28 Maintaining the Appliance ................28 Cleaning the Appliance ...................29 Maintaining the Filter ..................30...
SAFETY INSTRUCTIONS The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. This symbol is displayed to indicate matters and operations that can cause risk.
Page 4
For use in Europe • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 5
Operation • If the appliance is immersed in water, stop using it and contact the LG Electronics service centre. • If there is a gas leakage (isobutane, propane, LNG, etc.), do not touch the product or power plug and ventilate the area immediately.
Page 6
Maintenance • Dispose of the packing materials (vinyl, styrofoam, etc.) to keep them out of reach of children. • Be careful not to allow any part of your body to be pinched when you detach and reattach parts of the appliance. •...
Page 7
CAUTION To reduce the risk of minor injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: Installation • Do not tilt the appliance to pull or push it when transporting. •...
Page 8
• Do not let the moisture from the humidifier directly touch the appliance. • Do not use the appliance while it is not in upright position. • Do not use the appliance near objects vulnerable to heat. • Do not use detergents, cosmetics, chemicals, air fresheners, or disinfectants in the appliance.
Page 9
• Do not wash the filter with water. • Be careful not to damage the ultra-fine filter when you use a vacuum cleaner. • Do not disassemble the clean booster arbitrarily. Battery • Do not modify the battery arbitrarily. • Misplaced battery may cause an explosion. •...
• For more detailed information about disposal of your old batteries/ accumulators, please contact your city office, waste disposal service or the shop where you purchased the product. (http://www.lg.com/ global/sustainability/environment/take-back-recycling/global-network- europe) Disposal of Your Old Appliance •...
INSTALLATION • The appearance or components of the appliance may differ depending on the model. Parts and Specifications Front View Air outlet/Claen booster • It discharges purified air through the filter. • You can control the direction of the air so that it reaches every corner of the room. Light of air quality •...
Page 12
• It minimizes allergic materials, fine particles, possible sources of sick house syndrome, smog and other odour. Specifications • Appearance and specifications may vary without notice to improve the quality of the appliance. Model AS60GD Series Power 220-240 V~, 50 / 60 Hz Exterior dimensions When the clean booster is not running:...
Page 13
Filter System Deodorizing care filter • It minimizes harmful odour (gas) that are generated in everyday life such as bathroom smell, cigarette smoke (smell) and food smell. Allergen collection care filter • It minimizes PM1.0 and cigarette smoke from the air. Ultra-fine filter •...
Unpacking the Appliance Install the filter in the appliance. • Make sure that the handle(a) faces Unpack the appliance and remove any packing upward. tape or vinyl before using the appliance. Removing the Filter Vinyl Grab the top end of the rear cover and gently pull it.
Installation Place Requirements Installation Location Allow a 1 m clearance between the appliance and surrounding surfaces or objects. The air inlet needs space to function properly. The performance of the appliance may differ depending on the operating environment (such as temperature and humidity).
OPERATION • The appearance or components of the appliance may differ depending on the model. Control Panel Control Panel Features Start/Stop Button − Wi-Fi function off: Press and hold the Start/Stop button and the Speed Mode Button button at the same time for more than 3 seconds.
Page 17
Status Display Panel Display of air quality Icons Overall air quality (colour) Icon Description Particulate matter (colour) It turns on when it is time to replace the filter. Concentration of particles or sleep timer time It turns on when the Wi-Fi Concentration of odour (colour) function is activated.
Remote Controller NOTE • If the battery runs out of charge, replace it with a new one (CR2025). Remote Controller Features • If the remote controller does not work as expected, try to replace the battery or check the polarity (+, -) of the battery. If the problem continues, contact the service centre.
Using the Operation Mode Booster Mode The clean booster cleans the air and quickly sends it to a long distances to circulate the indoor air. Smart Mode Press the Mode button to choose Booster mode. It automatically controls the operation mode and air flow based on the overall air quality.
Adjusting the Fan Speed Clean Booster Fan Speed You can adjust the air flow of the clean booster. Air Purifier Fan Speed While in Booster mode, press the Booster Speed button. You can adjust the air flow of the air purifier. •...
Using the Extra Functions • Once the sleep timer is set, the status display panel displays only the sleep timer icon except for a few other icons. Using the Air Ionizer NOTE To generate ions to minimize various bacteria from •...
• The PM concentration measurement was tested using LG Electronics’ standard test materials. • Differences in PM concentration values may be the result of different methods of measuring or differences in the actual PM concentration levels.
Page 23
Air Quality Details on the Status Turning on/off the Light of Air Display Panel Quality Check the cleanliness of the indoor air by looking at the light of air quality. Overall air quality You can check the overall air quality by looking at the colour change on the status Light of air quality display panel.
Page 24
Knowing the Particles Concentration You can check the particulate matter concentration by its particle size. Press the Indicator button during the operation • Whenever you press the button, the display changes in the following order: PM10 ~ PM2.5 ~ PM1.0 •...
Internet service provider or refer to your wireless router manual. Things to check before using LG • LG SmartThinQ is not responsible for any network connection problems or any faults, SmartThinQ malfunctions, or errors caused by network •...
Page 26
• The application is subject to change for LG Electronics will also provide open source code appliance improvement purposes without to you on CD-ROM for a charge covering the cost notice to users.
Smart Use this function if you need an accurate diagnosis Diagnosis™. by an LG Electronics customer information centre • The data transfer sound may be harsh to the when the appliance malfunctions or fails. Use this ear while the Smart Diagnosis™...
• A filter is a consumable item. Therefore you must buy a new one for replacement when it has reached the end of its lifespan even during the warranty period. Contact the LG Electronics service centre or consumables shop on the LG Electronics site (www.lg.com).
Storage Cleaning the Particles Sensor If the appliance is not used for a long period of PM1.0 sensor detects the fine particles as well as time, store it at a shaded and dry place. coarse particles. Therefore, you need to clean its lens regularly.
Maintaining the Filter Replacing the Filter Remove the cover and replace the filter. Cleaning the Filter • To avoid polluting the surroundings when replacing the filter, place a newspaper on Separate the cover from the appliance. the floor before you remove the filter. Remove dust from the ultra-fine filter with a Once you have replaced the filter, disable the vacuum cleaner or soft brush.
TROUBLESHOOTING Before Calling for Service Operation Symptoms Possible Causes & Solution Is the power plug unplugged from the outlet? The appliance does not operate. • Plug it into the outlet properly. Is the light of air quality turned on red or orange? •...
Page 32
• Make sure that the levels of the PM1.0/PM2.5/PM10 are displayed are different between consistently between the LG SmartThinQ app and your appliance. the appliance and the • The difference in the values could be caused by the difference in updated LG SmartThinQ app.
Page 33
The password for the Wi-Fi that you are trying to connect to is incorrect. • Find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG SmartThinQ. Mobile data for your smartphone is turned on.