Cleaning The Product Exterior; Cleaning The Filters - LG AG16GB Series Owner's Manual

Cleaning the product
exterior
1
Remove particles from the air inlet and
the air outlet using a vacuum cleaner.
2
Wipe the product exterior with a soft
lint-free cloth.
CAUTION
• Do not wipe the appliance with an alkaline
detergent.
• Never use sulphuric acid, hydrochloric acid
or organic solvent (e.g., thinner, kerosene
and acetone) to wipe the appliance
exterior, or affix labels on the exterior.
Doing so may damage the product surface.
• Care should be exercised to prevent
flowing of water into the product.

Cleaning the Filters

1
Open the air inlet of the appliance and
separate the filter.
2
Remove the particles from the filter
using a vacuum cleaner or a soft brush.
3
If the prefilter is severely contaminated,
remove large particles first and wash it
using running water.
(Do not use water at a temperature of
40°C or higher.)
CAUTION
• Do not wash the allergen collection
care filter or the deodorizing care filter
using water. Doing so may decrease
the filter lifespan. If the filter is severely
contaminated, it should be replaced.
• Be careful not to damage the filter when
using the vacuum cleaner.
• Dry the washed prefilter completely in
shade. Using it in not completely dried
status may cause an odour.
• If the prefilter is very dirty, wash in a
solution of water and neutral detergent.
• Do not dry the washed prefilter using a
device such as a hair drier. Doing so may
cause deformation.
29