Operation starting
Press the Start/Stop button to start the operation.
NOTE
• When the operation is started for the first time,
the appliance operates in Booster mode.
• The most recently used mode is memorized
if the power supply is cut off as a result of a
power failure.
• When the operation begins, the display
of sensor ready (
approximately 30 seconds.
Using the Mode
• Each time you press the Mode button,
the mode changes in the following order:
Smart→Booster→Dual→Single.
− Dual: Only for the relevant product
) will appear for
Smart Mode
Operating mode and fan speed are adjusted
automatically according to overall air quality.
NOTE
• When the appliance is operated in Smart
mode, Speed, Booster Speed, and Swing
buttons are not operated.
Booster Mode
Clean Booster circulates the indoor air by quickly
sending purified air over an extended distance.
CAUTION
• Be careful not to allow your hands to be
pinched by the moving parts of the clean
booster.
NOTE
• When the power cord is unplugged before the
clean booster is completely closed, plug the
cord in again. The clean booster will rotate and
properly close.
Rotating the Clean Booster
Press the Swing button during the Booster mode
operation.
EN
17