Table of Contents
Advertisement
22
USING
Operating the Air Purifier
Things to Know before Operation
※ The control panel is located below the table
Standby On/Off
Speed
button
button
Standby On/Off
Turns the product on and off.
• Press the Standby On/Off button to start
operation.
NOTE
• If you stop operation and then resume, it will
start cleaning with the mode you last selected.
• If the product is unplugged or a power failure
occurs during operation, the most recently
used mode (speed, light) will be memorized.
Adjusting the Speed
You can adjust the fan speed from the air purifier.
• When you press the Speed button during
product operation, the speed changes in the
order of Auto → Low → Middle → High →
Sleep.
Mood Light
button
NOTE
• The higher the speed, the higher the
purification rate in the space.
• When Auto is set, the speed will be controlled
automatically according to the contamination
level of the indoor air.
• When Sleep is set, the air quality light will be
turned off.
EN
Advertisement
Table of Contents
