Checking The Air Quality - LG AG16GB Series Owner's Manual

Checking the Air Quality

The overall air quality can be checked through the status display panel.
Understanding the Overall Air Quality
The overall air quality is calculated based on the particles and odour (gas) concentrations
and is categorized into 4 levels including green, yellow, orange or red depending on the
contamination of the air.
Overall air
quality
Colour
State
Red Poor
Orange Unhealthy
Yellow Moderate
Green Good
• You can check the overall air quality by looking at the light of air quality and the status
display panel.
• The colour of overall air quality is determined based on whichever is worse between the
particles concentration and odour (gas) concentration.
Checking the Air Status from
the Status Display Panel
You can check the overall air quality,
concentration of particles and odour from the
status display panel of the appliance.
• Overall air quality: You can check the
overall air quality through colour.
• Concentration of particles: You can check
the concentration of particles through a
specific figure and the colour displayed
on the size of dust particles. The
concentration of particles indicates the
concentration of particles contaminated
first among PM10, PM2.5, PM1.0.
Concentration of particles ( ㎍ /m
PM2.5
PM10
(ultra fine
(fine dust)
dust)
255 or more 56 or more
155 ~ 254 36 ~ 55
55 ~ 154 13 ~ 35
54 or less 12 or less
)
3
PM1.0
(Super ultra
fine dust)
56 or more
36 ~ 55
13 ~ 35
12 or less
– If the concentration of particles
is in Good level, it indicates the
concentration of PM10.
– If the concentration of particles is
over Moderate level, the colour
and concentration of particles for
the highest contamination level are
displayed. If the contamination level is
the same, the colour and concentration
of particles are displayed in the order
of PM10, PM2.5, PM1.0.
• Concentration of odour: You can check the
concentration of odour through colour.
Concentration of odour
(gas)
State Level
Very strong 4
Strong 3
Normal 2
Weak 1
21