LG AG16GB Series Owner's Manual page 5

Hide thumbs Also See for AG16GB Series:
Table of Contents

Advertisement

Installation
• Do not install the appliance on an uneven or inclined surface.
• Do not install the appliance in an area exposed to direct sunlight
or near heat-generating equipment.
• Do not install the product in a place where combustible gas may
leak or industrial oil or metallic particulates are present.
• Be careful not to let the power plug pressed by the back of the
appliance.
• Do not touch the power plug with wet hands.
• When unplugging the power cord, always pull it by the plug.
• Unplug the appliance during thunder or lightning or when not in
use for a long time.
• Do not bend the power cable excessively or place a heavy
object on top of it.
• Do not extend the length of the power cable or alter it.
• Do not use several devices on a multi-socket extension outlet.
• Make the connection securely so that screw in terminals may
not be loosed when pulling cable.
• Take care to ensure that power cable could not be pulled out or
damaged during operation.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in
order to avoid a hazard.
• Be sure to use the power plug and outlet with an earth terminal.
Operation
• If the appliance is immersed in water, stop using it and contact
the LG Electronics service centre.
• If there is a gas leakage (isobutane, propane, LNG, etc.), do
not touch the product or power plug and ventilate the area
immediately.
• Do not clean the appliance with brushes, cloths or sponges with
rough surfaces or which are made of metallic material.
5

Advertisement

Table of Contents
loading

Table of Contents