Related Manuals for LG AM30GUWF1
Summary of Contents for LG AM30GUWF1
- Page 1 OWNER'S MANUAL AIR PURIFIER Please read this manual carefully before operating your set and retain it for future reference. Model name: AM30GUWF1 MFL66979828 Rev.00_072017 www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS 3 SAFETY INSTRUCTIONS 20 HOW TO CLEAN How to clean the exterior 7 HOW TO INSTALL How to clean the dust sensor How to clean the air outlet Selecting installation place Filter cleaning Use the air purifier as this. How to clean and replace various filters How to clean the tray and the 8 NAME OF THE PARTS... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ THESE INSTRUCTIONS CAREFULLY This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product. - Page 4 • If the product is immersed in water, stop using it and contact the LG Electronics service center. • If there is a gas leakage (isobutane, propane, LNG, etc.), do not touch the product or power plug and ventilate the area immediately.
- Page 5 SAFETY INSTRUCTIONS • Only an authorized repair person from LG Electronics service center should disassemble, repair, or modify the product. • Do not use or store fire, combustibles (ether, benzene, alcohol, drugs, propane, butane, combustible spray, insecticide, air freshener, cosmetics etc.) or flammable materials (candles, lamps etc.) near the product.
- Page 6 SAFETY INSTRUCTIONS USAGE • Do not use the product for removal of toxic gas such as carbon monoxide. • Do not use the product for ventilation purposes. • Do not use the product for a long time in a region with unstable voltage. •...
-
Page 7: How To Install
HOW TO INSTALL HOW TO INSTALL Selecting installation place Main Unit • Place with handy power connections • Place with no obstacle to clog air inlet • Place with horizontal surface and rich air circulation Warning There can be product failure if the air purifier is installed on a moving vehicle such as cars, boats and others. -
Page 8: Name Of The Parts
NAME OF THE PARTS NAME OF THE PARTS Product Main unit Air discharge outlet cover Filter case Pre filter + Allergen filter + Deodorization Handle filter + HEPA filter Display part Sensor part (odor sensor) Sensor part (dust sensor) Front panel Power cord Cleanliness indicator lamp It is the lamp indicating the room air cleanliness status. -
Page 9: Operation Indicator And Control Part
NAME OF THE PARTS Operation indicator and control part Overall Cleanness display Overall cleanness including odor and Odor/dust display dust is displayed in 4-level color Lock display Sleep display Wind speed display Humidity display Mode display Filter Check display Dust indicator display Mode button Indicator button Ionizer button... -
Page 10: Filter System
• The filter composition can vary depending on a model in use. • If you need more and change filter, please contact the LG service center. • Nothing but an operation with the filter equipped guarantees a normal air purification... -
Page 11: Humidification Cleaning Filter System
NAME OF THE PARTS Humidification cleaning filter system Filter name Function Cleaning and replacement cycle It is filter for large particles removal Cleaning period: Once per week or Humidification and is done with anti-biotic more cleaning filter treatment, which helps the life Replacement cycle: about 1 year extension. -
Page 12: How To Use
HOW TO USE HOW TO USE Air cleaning operation It purifies the indoor with clean and fresh air. 1. Press the button to start the air cleaner operation. 2. Set to the cleaning operation mode with mode button. 3. Select the desired wind amount with Speed button. -
Page 13: Indicator Display
HOW TO USE Indicator display 1. Press the Indicator button and check the density of PM10 / PM2.5 / PM1.0. • Pressing the button each time checks the density of PM10 → PM2.5 → PM1.0 in turn. Pressing the Indicator button during operation displays the density of PM10 / PM2.5 / PM1.0 at the display for 10 seconds. - Page 14 - Indicated dust concentration values can differ from each other depending on the differences in dust measuring methods and also from real dust concentration levels. - The assessment of dust density was made against dust used for LG Electronics standards tests.
-
Page 15: Ionizer Operation
HOW TO USE Ionizer operation It generates negative ion and removes various bacteria in the air. 1. Start the air purifier by pressing the button. 2. Press the Ionizer button. • It removes hazardous substances such as bacteria, virus and others in the air. •... -
Page 16: Lock Function
HOW TO USE Lock function 1. Press the button. 2. Press the Mode button and Speed button simultaneously for over 3 seconds. • It sets Lock function with the sound "Ting". • It may protect the product by unwanted operation by children or others. •... -
Page 17: Checklist Before Using The Humidification Cleaning Function
HOW TO USE Checklist before using the humidification cleaning function Check the humidification filter assembly status 1. Separate the water tank. 2. Separate the tray. • Be careful not to have overflow of the water, and lightly lift and pull to the arrow direction to separate. 3. - Page 18 HOW TO USE Water tank water supply 1. Open the water tank cap and supply tab water into the water tank. • Fill the water as much as there is no water leaking when the water tank cap is assembled. CAUTION •...
-
Page 19: Humidification Cleaning Function
Humidification cleaning function Humidification cleaning function Humidification cleaning operation 1. Press the button. 2. Set to the humidification cleaning mode with Mode button. • You cannot set to the desired humidity. • During the humidification cleaning operation, the humidification is done with fine particle, so you will not see the spraying. -
Page 20: How To Clean
HOW TO CLEAN HOW TO CLEAN How to clean the exterior Soak soft cloth in warm water, squeeze it well, and wipe the humidification air cleaner. CAUTION • Do not wipe the main unit control part and display part with alkali detergent. •... -
Page 21: How To Clean The Air Outlet
HOW TO CLEAN How to clean the air outlet 1. Hold the air outlet cover’s wave pattern part and lift upward to separate. 2. Use the cleaning brush and cleaner inlet to remove the dust on the safety blocking net. 3. -
Page 22: Filter Cleaning
HOW TO CLEAN Filter cleaning 1. If it is in operation, turn off the power and pull out the cord. Pull the front panel forward to open. Front panel 2. Pull the filter case upward and take out from the main unit. 3. -
Page 23: How To Clean And Replace Various Filters
HOW TO CLEAN How to clean and replace various filters Filter type Classification Cleaning cycle How to clean Clean the Pre-filter with a vacuum cleaner or About a month a soft brush, and when the contamination is Pre-Filter For washing washing Cycle severe, use a neutral detergent and water to clean it off. -
Page 24: Humidification Filter
HOW TO CLEAN • Frequently wash the water tank and the tray. Water stain is removed, and you can use the product hygienically. • Do not disassemble the float of the tray. It may cause failure. If it is disassembled by shock, assemble in the order as in the right side figure. •... -
Page 25: How To Store
HOW TO STORE HOW TO STORE 1. On a sunny day, operate in clean operation mode for 1 hour or more, and press button to stop the operation. Power plug • If you operate it for 1 hour or longer on a sunny day, you can remove the moisture and mold inside the product. -
Page 26: Troubleshooting Before Calling For Service
TROUBLESHOOTING BEFORE CALLING FOR SERVICE TROUBLESHOOTING BEFORE CALLING FOR SERVICE If there is a problem with the product, check the following cases first before requesting service to the service center. Symptom Check Actions • Isn’t the power plug pulled • Insert correctly into the socket. It does not start at out? all. -
Page 27: Before Calling For
TROUBLESHOOTING BEFORE CALLING FOR SERVICE Symptom Check Actions • Sensor may be dirty or • See instructions for cleaning sensor. There has been blocked by foreign material. no change in micro dust • Air purifier may be in • Indoor air quality may stay the same in concentration. -
Page 28: Product Specification
Height Width Depth The external dimension, design and product standard can change to improve the quality of the product. Model name AM30GUWF1 Power supply 220–240 V~ 50/60 Hz Weight of Product 10.2 kg Appearance Size(mm) 450(w) x 635(H) x 305(D)