Advertisement
2. Removing/reinstalling the ADU conveyance guide
(Upper)
a. Procedure
(1) Open the upper main body.
(2) Remove the four set screws, then remove the Exit disk
mounting plate and the exit tray.
CAUTION: Machine with the sorter:
Release the sorter from the main body
Set screws
(3) Remove the four set screws, then remove the ADU
guide unit.
Exit tray
Exit tray
mounting plate
ADU guide unit
Set screws
(4) Remove the main body tray, two set screws, and the
lower main body cover (left).
Set screws
.
Lower main body cover (left)
(5) Remove the set screw, and the left rear cover, sliding it
to downward to clear the protruding part.
(6) Remove the two set screws, then remove the ADU
conveyance guide cover.
Set screw
Left rear cover
1-7
MAIN DRIVE SECTION
ADU conveyance guide cover
Set screws
Advertisement
