Advertisement
(13) Wind the auxiliary wire four turns counterclockwise
around the drive pulley.
Drive pulley (Rear)
(14) Connect the auxiliary wire to the drive auxiliary spring
through the pulley.
Auxiliary wire
Pulley
4turns
Auxiliary wire
Drive auxiliary spring
1-27
(15) Loosen the set screw and adjust inclination of the paper
tray by moving the adjuster, then tighten the set screw.
Set screw
(16) Reinstall the tray front cover with the four set screws.
(17) Reinstall the LCT tray.
LCT/PFU SECTION
Adjuster
Advertisement
