Advertisement
4. Removing/reinstalling the LCT paper feed roller
a. Procedure
(1) Remove the DB rear cover.
(2) Remove the LCT tray.
(3) Remove the spring and E-ring from the drive gear, then
remove the drive gear and pin from the LCT paper feed
roller.
Drive gear
E-ring
LCT paper feed roller
(4) Remove the E-ring and bushing from the shaft of the
LCT paper feed roller.
LCT paper feed roller shaft
E-ring
Pin
Spring
Bushing
(5) Remove the E-ring and bushing from the front side of the
LCT paper feed roller shaft, ten take the LCT paper feed,
roller unit out.
LCT paper feed roller shaft
(6) Remove each E-ring, then remove the paper feed roller
and pin from the roller shaft.
Roller guide
(7) Reinstall the roller in the reverse order of removal.
1-11
MAIN DRIVE SECTION
Bushing
Pin
LCT paper feed roller
Roller shaft
E-ring
E-ring
Advertisement
