Advertisement
ADU NIP ROLLER DRIVE SECTION
2. Signal
a. Input signal
(1) PS107 (PS107 → ADUDB)
This is the signal for the nip roller home position.
[L]: Nip roller home position
[H]: Nip roller out of home position
(2) PS106 (PS106 → ADUDB)
This is the signal for cam one turn.
[L]: Detects detecting plate (cam home position)
[H]: Not detect detecting plate (cam out of home posi-
tion)
(3) PS1010s (PS1010s → ADUDB)
This is the signal for no paper in the stacker.
[L]: No paper
[H]: Detects paper
(4) PS101 (PS101 → CB)
This is the signal for paper feed from the main body to the
ADU.
[L]: No paper
[H]: Detects paper
b. Output signal
(1) ADU-S/S (ADUDB → M101)
This is the start/stop signal to M101.
[L] : M101 OFF
[H] : M101 ON
(2) ADU-F/R (ADUDB → M101)
This is the clockwise/counterclockwise drive signal for
M101.
[L] : Reverse rotation
[H] : Normal ratation
(3) SD101DRIVE (ADUDB → SD101)
This is the ON/OFF signal for SD101.
[L] : SD101 ON
[H] : SD101 OFF
(4) SD102DRIVE (ADUDB → SD102)
This is the ON/OFF signal for SD102.
[L] : SD102 ON
[H] : SD102 OFF
1-22
Advertisement
