Advertisement
Papers fed to the ADU are held by the nip rollers and stored
in the stack section up to 10 sheets.
ADU
nip rollers
ADU
stack section
The paper in the stack section is fed to the changeover
conveyance section by means of reverse rotation of the nip
roller. The paper is entered into the normal conveyance
route in the main body, then copied on the back side and
finally delivered to the exit tray.
Changeover
conveyance
section
ADU nip rollers
ADU stack section
[3] Disassembly and Assembly
Caution:
Disconnect the power cable plug from the wall
I
outlet.
1. Removing/reinstalling the ADU Conveyance Unit
(Lower)
a. Procedure
(1) Open the upper main body.
(2) Remove the four set screws, then remove the exit tray
with the mounting plate.
CAUTION:
If the sorter is already installed, remove the sorter
first from the main body.
(3) Remove the set screw, then remove the fixing front
cover.
Fixing Front cover
1-5
MAIN DRIVE SECTION
Exit tray
mounting plate
Set screws
Set screw
Exit tray
Advertisement
