Charging The System - Nonin CO-Pilot H500 Quick Start Manual

08 Checking Signal Processor Battery Status
To check the signal processor battery status, quickly
press the On/Off button on the signal processor. Green
battery indicator lights will light indicating current
battery status. Signal processor battery status can also
be found on the display screen as shown in Section 02.
Signal Processor Battery Status Matrix
Battery Indicator
Three green lights lit
Two green lights lit
One green light lit
One green light blinking
No Lights

09 Charging the System

1
2
Display
Charging Port
*Do not use system while charging
Charge the display and signal processor (SP-
BLE) using the provided Nonin chargers ONLY*
Insert charger into respective ports shown
below to charge.
Battery Level
High (60-100%)
Medium (20-59%)
Low (5-19%), charge SP-BLE
Critical (0-4%), charge
SP-BLE
Depleted or off
SP-BLE
Charging Port
Page 6 of 9
CO-Pilot User Guide
PN 114100-001-01