Table of Contents
Advertisement
05 Placing Disposable rSO
1
2
3
4
NOTE
06 Placing Finger Clip Sensor
1
2
3
07 Determining Pulse Signal Quality
Pulse signal quality can be determined by the color of
the pulse waveform as shown.
Green = Good
Connect INT-100 to signal processor as shown
in Figure 1
Connect 8204CA sensor
to INT-100 and engage
lock per Figure 3
Remove the protective backing from the sensor
pad and gently, but firmly place the sensor
above the eyebrow per Figure 4
Ensure sensor surface adheres to the skin to
prevent light from traveling between emitting
or receiving elements or ambient light from
entering
An improperly placed
sensor may result in
inaccurate readings.
If sensor does not adhere
fully, sensor may result in
inaccurate reading
Connect sensor to signal processor as shown
in Figure 1
Select proper sensor size and use a clean, dry
finger. Heavy lotions, sunscreen, dirt, oils and
nail polish may alter accuracy
Gently squeeze open the sensor and insert the
finger all the way into the sensor
Yellow = Marginal
Sensor
2
Red = Insufficient
Figure 3
8204CA
8204CA
Figure 4
Page 5 of 9
CO-Pilot User Guide
PN 114100-001-01
Advertisement
Table of Contents
