Advertisement
18. Release the four retaining tabs that secure the
front seat belt upper anchor cover, and remove
the anchor cover. Take care not to damage the
retaining tabs.
SEAT BELT
ADJUSTER
FRONT SEAT BELT UPPER ANCHOR BOLT
(Note the sequence of washers. Tape the
washers together to prevent them from
being disrupted.)
19. Remove the front seat belt upper anchor bolt.
20. Remove the clip that secures the top of the center
pillar upper trim, and remove the trim by sliding it
upward. Take care not to damage the clip or the
retaining tab.
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
RETAINING
TABS (4)
FRONT
SEAT BELT
UPPER
ANCHOR
COVER
CLIP
CENTER
PILLAR
UPPER
TRIM
RETAINING TAB
21. Lower the glove box by removing the right and left
stops.
STOPS (2)
22. On the passenger's side of the vehicle, remove
the front door opening trim around the front pillar
trim. Remove the front pillar trim (four clips).
FRONT
PILLAR
TRIM
AII 26017 (0308)
Lower
completely.
GLOVE
BOX
CLIPS (4)
FRONT
DOOR
OPENING
TRIM
7 of 15
Advertisement
