Advertisement
48. Plug the i -VES harness 20-pin and 16-pin
connectors into the rear of the DVD player.
i -VES HARNESS
20-PIN CONNECTOR
i -VES HARNESS
16-PIN CONNECTOR
49. Slide the DVD player into the beverage holder
opening, and install the three self-tapping screws
and two screws you removed in step 13, along
with the two 5 mm flange nuts provided. Do not
pinch the vehicle harness between the DVD player
bracket and the vehicle frame.
SELF-TAPPING
DVD PLAYER
SCREW
5 mm
FLANGE
NUT
SCREW
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
DVD PLAYER
DVD PLAYER
BRACKET
SELF-
SCREW
TAPPING
SCREW
50. Plug the i -VES harness 20-pin connector and the
FM modulator antenna lead into the rear of the
audio unit. (If equipped with a navigation system,
plug the i -VES harness 20-pin connector, the
vehicle connectors, and the antenna lead into the
rear of the navigation unit.) Slide the audio unit or
navigation unit into the audio unit opening, and
install the four bolts and the two self-tapping
screws, if equipped.
Without Navigation System:
i -VES
HARNESS
20-PIN
CONNECTOR
With Navigation System:
FM
MODULATOR
ANTENNA LEAD
AII 26017 (0308)
FM
MODULATOR
ANTENNA
LEAD
AUDIO UNIT
PLAYER
i -VES HARNESS
20-PIN CONNECTOR
VEHICLE
CONNECTOR
SELF-TAPPING
SCREW
NAVIGATION
UNIT
BOLT
BOLT
13 of 15
Advertisement
