Honda 08B23-S0X-100 Installation Instructions Manual page 14

If you're installing the DVD Player in the audio unit
opening, continue with step 51, otherwise; go to step
56.
51. Remove the left and right audio unit brackets (two
washer-screws for each bracket).
AUDIO UNIT
LEFT AUDIO
BRACKET
WASHER-
SCREW
(Reuse.)
52. Remove the pocket (two self-tapping screws),
then separate the audio unit from the pocket. Set
the pocket aside; it will not be reused.
53. Position the audio unit on the DVD player, and
reinstall the left and right audio unit brackets
with the four washer-screws removed in step 51
and the four 5 x 12 mm washer-screws from the
i -VES base unit kit.
WASHER-
LEFT
SCREW
AUDIO
(reused)
BRACKET
5 x 12 mm
WASHER-
SCREW
(Included in
the i -VESbase
unit kit.)
AUDIO
UNIT
DVD
PLAYER
14 of 15
WASHER-
SCREW
(Reuse.)
RIGHT AUDIO
BRACKET
SELF-
TAPPING
POCKET
SCREW
BRACKET
INSTALL POSITION
WASHER-
SCREW
(reused)
RIGHT AUDIO
BRACKET
5 x 12 mm WASHER-
SCREW
(Included in the
i -VES base unit kit.)
54. Plug the i -VES harness 20-pin and 16-pin
connectors into the rear of the DVD player, and
plug the i -VES harness 20-pin connector (blue)
into the rear of the audio unit.
i -VES
HARNESS
20-PIN
CONNECTOR
i -VES
HARNESS
16-PIN
CONNECTOR
55. Slide the audio unit and DVD player into the audio
unit opening, and install the four bolts.
AII 26017 (0308)
AUDIO UNIT
DVD PLAYER
i -VES HARNESS
20-PIN
CONNECTOR
(Blue)
AUDIO UNIT
DVD
PLAYER
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
BOLT