Honda 08B23-S0X-100 Installation Instructions Manual page 11

37. Along the door opening, secure the i -VES
harness to the vehicle harness with two wire ties
in the areas shown.
FLOOR CARPET
VEHICLE
HARNESS
i -VES
HARNESS
38. Near the fuse box, secure the i -VES harness to
the vehicle harness with one wire tie. Make sure
you do not secure the i -VES harness to the
yellow SRS harness.
FUSE
BOX
VEHICLE
HARNESS
39. In the glove box opening, secure the i -VES
harness to the vehicle panel with two wire ties.
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
WIRE TIE
i -VES
WIRE
VEHICLE
HARNESS
TIES (2)
PANEL
WIRE
i -VES
TIE
HARNESS
i -VES
HARNESS
40. Route the i -VES harness 20-pin connectors and
16-pin connector behind the vehicle frame and out
through the audio unit opening as shown.
20-PIN
CONNECTORS
VEHICLE
20-PIN
CONNECTOR
i -VES
HARNESS
20-PIN
CONNECTOR
(Blue)
41. Connect the i -VES harness 20-pin connector
(blue) to the vehicle harness 20-pin connector.
42. Secure i -VES harness to the vehicle harness
with two wire ties.
AII 26017 (0308)
WIRE TIE
i -VES
HARNESS
i -VES HARNESS
20-PIN CONNECTOR
VEHICLE
WIRE
HARNESS
TIE
i -VES HARNESS
16-PIN CONNECTOR
VEHICLE
FRAME
i -VES
HARNESS
11 of 15