Table of Contents
Advertisement
WWW.JEIUK.COM
process will result in cutter breakage, or can cause the magnet to break away from the
surface, resulting in injury. (Note – always secure the machine to the workpiece with the
provided safety strap).
To achieve multiple layer cutting, please refer to JEI's multi-Layer Cutter form, available for
all Turbo™ types. This will allow the solid slugs to be retained in the cutter during the cut and
be safely ejected once the hole cutting process is completed.
Do not attempt this operation whilst the machine is set in automatic mode. Only carry out
the multi-layer hole making process using the machine in manual setting.
Please refer to your JEI distributor for further details.
3.2. Mounting and dismounting the cooling system bottle
Hang the cooling system bottle on the screws (1, Figure 6) and attach the bottle hose to the
coupling (2). Dismount in reverse order.
This document is protected by copyrights.
10
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
Advertisement
Table of Contents
