Register Account Via Lcd Menu - Grandstream Networks WP810 User Manual

e. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually
in the form of digit similar to phone number or actually a phone number.
Authenticate ID: SIP service subscriber authenticate ID used for authentication. Can be
f.
identical to or different from SIP User ID.
g. Authenticate Password: SIP service subscriber's account password to register to SIP
server of ITSP. For security reasons, the password field will be shown as empty.
h. Outbound Proxy with your outbound proxy IP address or FQDN. Leave empty if not
available.
6. Press Save and Apply to save your configuration.
After applying your configuration, your phone will register to your SIP Server. You can verify if your WP810
has registered with your SIP server from its web interface under Status → Account Status ("Registered"
with green color when the account is correctly registered, or "Unregistered" with red when the account is
not properly registered)

Register Account via LCD Menu

To register your SIP account via the LCD menu, please refer to following steps:
1. Unlock your WP810 and press Menu to bring up operation menu.
2. Use arrow keys to reach Settings and then select Account tab.
3. Select which account you want configure and then set the following:
a. Enable Account to "Enable".
b. Account Name: Any name to identify this specific user.
c. SIP Server field with your SIP server IP address or FQDN.
d. SIP User ID: User account information, provided by VoIP service provider (ITSP).
Usually in the form of digit similar to phone number or actually a phone number.
e. SIP Authenticate ID: SIP service subscriber authenticate ID used for authentication.
Can be identical to or different from SIP User ID.
SIP Authentication Password: SIP service subscriber's account password to register
f.
to SIP server of ITSP. For security reasons, the password field will be shown as empty.
g. Voicemail Access Number: The voicemail number of your account.
h. Display Name: The name that will be used for caller ID name in SIP INVITE.
WP810 User Guide
Version 1.0.1.1
P a g e | 44