Group Paging; Enabling Group Paging Feature - Grandstream Networks WP810 User Manual

•
Default channel: The PTT channel used to transmit an outgoing page if the user does not explicitly
specify a channel.
•
Priority channel: The channel assigned for priority pages.
•
Emergency channel: The channel assigned for emergency pages.
•
Accept while busy: If no, incoming PTT sessions do not produce standard call waiting. If yes,
incoming PTT sessions produce standard call waiting behavior on the active audio channel.
•
CallerID(*): Caller ID number for identification.
•
PTime: The audio payload size in milliseconds.
•
Audio codec: The audio codec to use for outgoing PTT broadcasts. Incoming PTT audio will be
decoded according to the codec specified in the incoming message.
•
Channel: Set the channel whether to be usable, transported, acceptable, joined and the channel
display name.

Group Paging

Enabling Group Paging Feature

You can enable and specify settings for the Group Paging feature through the phone's user interface.
To specify the Group Paging feature settings:
1. Using your phone's interface, navigate to the Group Paging Configuration menu by pressing Settings→
Advanced setting→ PTT and paging→PTT and group paging.
2. Choose Group Paging Configuration.
3. Set Group Paging function to Enabled.
Please, refer to the following screenshots:
WP810 User Guide
Version 1.0.1.1
P a g e | 73