Configuring The Lcd Brightness And Screen Timeout; Table 10: Wp810 Network Status Description; Figure 17: Wp810 Network Status - Grandstream Networks WP810 User Manual

The following information will be displayed:
Setting
Network SSID
BSSID
IPv4 Address
IPv6 Address 1
Signal strength
Connections Speed
Channel
Frequency
Other Information

Configuring the LCD Brightness and Screen Timeout

1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Settings.
3. Navigate to Basic Settings, and then select Display.
4. Configures the LCD brightness, key backlight, lock screen, screen time out and the font size.
5. Press "Back" (right softkey) to save and apply the new settings.

Figure 17: WP810 Network Status

Table 10: WP810 Network Status Description

Description
Displays the SSID Name on which the handset is connected.
Displays the MAC address of the Access Point on which the handset is
connected.
Displays the IP address of the handset.
Displays the IPv6 address.
Displays the Wi-Fi signal strength.
Displays the link speed (Mbps)
Displays the channel used.
Displays the channel frequency.
Tx/Rx Packets, Tx/Rx Error Packets, Tx/Rx Error Rate, Tx/Rx Drop
Packets and Tx/Rx Drop Rate.
WP810 User Guide
Version 1.0.1.1
P a g e | 42