Locate Via Dp750 Base Station; Register A Sip Account; Register Account Via Web User Interface; Figure 20: Locate Handset Via Web Ui - Grandstream Networks DP750 Administration Manual

Locate via DP750 Base station

1. On DP750 Base station back side, press Radio/Page button
2. All registered handsets will receive Paging call.
3. Once located, you can end the paging calling by pressing any key on the handsets or by pressing
again Radio/Page button.

Register a SIP Account

DP750 supports up to 10 SIP accounts, 5 handsets. Each Handset can be configured up to 10 accounts.
Please be aware that line settings will be affected by DID settings (hunting group settings) in "DECT - SIP
Account Settings".

Register Account via Web User Interface

1. Access the Web GUI of your DP750 using the admin's username and password. (Default username
and password is: admin/admin).
2. Press Login to access your settings and navigate to Profiles tab and select a profile to use.
DP750 supports up to 4 profiles. A profile is a set of settings including general settings, network settings,
SIP setting, audio setting, call settings and ring tones, etc.
A profile can be used with different SIP accounts.

Figure 20: Locate Handset via Web UI

DP750/DP720 Administration Guide
Version 1.0.11.4
.
P a g e | 79