Sleep Time Setup; Recover Factory Settings Via Web Server - Sharp DX-B351PL User Manual

Sleep time setup

5.2.2.2.
The default sleep time of printer is 1 minute and it can be changed via the embedded Web server
(the printer installed via network connection).
1. Log into the embedded Web server (please refer to
2. Click "Settings" – "Machine settings" – "System".
3. Select sleep time according to your needs and then click "Apply".

Recover factory settings via Web server

5.2.2.3.
1. Log in the embedded Web server (please refer to
2. Click "User Management" and then click "Restore to Factory Settings" to recover factory
settings. The printer will restart automatically after factory settings recovery is finished.
• After factory settings of printer are recovered, user name of the administrator
Note：
will be recovered to admin and the login password will be recovered to 000000.
• You can also recover factory settings via keys on the control panel of printer,
please refer to
• If factory settings of your printer are recovered, the sleep time will be recovered
to 1 minute automatically.
Chapter 5.1
Chapter 7.1.5.
Chapter 5.1 for login method).
for login method).
25