Restore Factory Settings; Auto Shut-Off Setting - Sharp DX-B351PL User Manual

Restore Factory Settings

7.1.5.
"Recover factor settings" is used to recover the default settings of the printer. The printer will restart
itself automatically after recovering factory settings.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "1. System Setting" option.
3) Press direction key "▲" or "▼" to select the "5. Restore Set" option and press "OK".
• Factory settings of network printer can be recovered via embedded Web server
Note：
(please refer to
• As for printers with LED control panel, press the power key to turn printer on and
then press the Cancel/Continue key for more than 2 seconds until the two green
status lights on the panel start to blink at the same time. Then, release the key and
wait for factory settings of the printer to recover. The printer will restart itself
automatically after finishing recovering factory settings.

Auto shut-off setting

7.1.6.
"Auto shut-off setting" to set the off condition and off delay of printer.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "1. System Setting" option.
3) Press direction key "▲" or "▼" to select options of "6. Auto off set", press "OK" to set
off condition and off delay.
Chapter 5.2.2.3).
39