Ip Address Setup; Ipv4 Setup - Sharp DX-B351PL User Manual

5.2.1.IP address setup

You need to connect your printer to network before IP address setup.
1. In case of wired network model, connect the printer to wired network by connecting to
its network interface with network cable.

IPv4 setup

5.2.1.1.
IPv4 address of the printer is divided into DHCP auto assignment and manual setting, and
the DHCP auto assignment function is on by default. You can set up the IPv4 address of
printer manually to set up fixed IPv4 address for the printer.
1. Turn on printer power to connect printer to network.
2. Log in the embedded Web server (please refer to
3. Click "Settings" – "Network settings" – "Protocol Settings" – "Wired IP Configuration".
4. Set the IPv4 address assignment mode as "Manual".
5. Input "IPv4 Address", "Subnet Mask" and "Gateway Address", and then click "Apply".
Chapter 5.1 for login method).
23