Driver Uninstallation; Driver Installation Based On Mac System; Driver Installation - Sharp DX-B351PL User Manual

"Refresh" to search again.
• If you want to install printer driver in the name of host, please click the "Printer
Name" you need to connect and "Install the printer from the list with a hostname".
• If IP address or host name is added manually, you need to know the IP address of
the printer connected or host name. If they are not made clear, please print the
"Network setup page" and view "IP Address" and "Host name" (Please refer to
Chapter 7.4).
8. It may take several minutes for the system to install the driver.
9. After installation is finished, an "Installation Complete" interface will pop up, which will
close automatically in about 3 seconds.

Driver uninstallation

3.1.3.
Uninstallation method
3.1.3.1.
Windows 7 is taken as the example in the following operation. The information on your
computer screen may differ because of multiple operating systems.
1. Click the Start menu of computer and then click All programs.
2. Click SHARP, and then Click SHARP XXX.
SHARP XXX where XXX represents product model.
3. Click uninstall to delete the driver according to instructions on uninstall window.
4. Restart computer after finishing unloading.

Driver installation based on Mac system

3.2.
• Driver installation under Mac system is divided into 2 steps, driver installation and adding a
printer. If you are going to print in AirPrint mode, there is no need to install a driver an d you
just need to add a printer directly.

Driver installation

3.2.1.
Mac 10.11 is taken as the example in the following operation. The information on your
computer screen may differ because of different operating systems.
1. Turn on the power on for the printer and computer.
2. Insert the CD accompanying the printer in the CD driver of your computer, and double click
SHARP XXX installation package. (XXX in SHARP XXX represents product model.)
18