Applicator Ball Valve (17J703); Hydraulic Ball Valve - Graco ToughTek F680e Instructions Manual

Applicator Ball Ball Valve Valve (17J703)
Applicator Applicator Ball Valve
Additional accessory kit that can be installed on the
end of the 1 in. ID, 25 ft material hose (115) directly
between the pole spray applicator pipe handle and
adapter fitting. The applicator ball valve (BV) can be
used to stop material flow, but only after the pump
has been stopped first. Do NOT use the valve to
stall the pump.
Hydraulic Hydraulic Hydraulic Ball Ball Valve Ball Valve Valve
When closed, the hydraulic ball valve will stop the
pump from cycling. The ball valve must be open to
pump material.
3A3110K
(17J703)
(17J703)
Component Identification
11