7.1 Navigation in the Menu
Using the buttons, and this can be simply and easily set the address code and function code.
If you view or modify the lighting feature set, then press ENTER button, the display will enter the menu
interface. Both there is sub menu corresponding to the functional operation of the main menu. Each of the
menus is representative of the specific features of the lamp. The specific contents shows as the table
menu below.
Set or browse lighting function, press UP or DOWN button.
Press ENTER to save your changes or enter the submenu.Press the UP or DOWN can change the nume-
rical (increase or decrease in value).
Press the MODE button to return to menu.
7.2 Display Operation
-When the power on, if the display is flashing, it indicates that the DMX signal connection is unnormal.
-Once powering on, the display indicates as following:
DMXA
Std.12
Main interface
CLIKE ENTER OF HOME PAGE TO SELECT:
> Main
DMX
menu interface
> Main
Service
> Main
Information
7.Display control
001
DMX address code
Mode
> Main
Personality
> Main
Stand-Alone
- 7 -