Display Control; Navigation In The Menu; Display Operation - Jolly A-7 SPOT User Manual

7.1 Navigation in the Menu

Using the buttons or touch screen, and this can be simply and easily set the address code and
code.
If you view or modify the lighting feature set, then press ENTER button, the display will enter the menu
interface. Both there is sub menu corresponding to the functional operation of the main menu. Each of the
menus is representative of the specific features of the lamp. The specific contents shows as the table
menu below.
Set or browse lighting function, press UP or DOWN button.
Press ENTER to save your changes or enter the submenu.Press the UP or DOWN can change the nume-
rical (increase or decrease in value).
Press the MODE button to return to menu. Set a time 1 to 10 minutes automatically exit menu interface
and close the screen.

7.2 Display Operation

Put through power supply, open the power switch of lamps and lanterns, display show the company
LOGO website. According to the main interface, as shown in figure:
In the main interface, press "MODE" button to view the software version, press the "UP" "DOWN" can m-
odify the DMX address.
If the screen " " icon is green,said DMX signal connection is normal, this state can be used to check th-
elamps and lanterns and connection between the control table is normal.
Fixture ID
00 1 0
Mode Up Down
E 12: BusErr 1 0 1
E 15: Ballast Error 07
E 17: BD 1 BUS Error 99
E 18: BD 2 BUS Error 99
E 19: BD 3 BUS Error 99
Mode Up Down
Can view the company LOGO,web
site, hardware, software version, date.
This lamp can be set to turn off the automatic flip screen function, touch this "
flip screen.

7.Display control

Enter
001
Enter
Main interface
S e tt in gs
Inforamtion
Personality
Manual Control
Advanced
Mode
Channel Mode
Mode1 1-24
Mode2 1-24
Mode3 1-27
Mode Up Down Enter Mode
1
1
00 1- 02 0
Set Up
CH-001: PAN
CH-002:PAN Fine
CH-003:Tilt
CH-004:Tilt Fine
CH-005:Cyan
CH-006:Magenta
CH-007:Yellow
Up Down Enter Mode Up Down
menu interface
Dmx Input Dmx Input
Wired Input
Wireless Input
Wireless In/
XLR out
Up Down Enter
Dmx Address
0 1 0
Mode Up Down
000.0% 000
0 00.0% 000
000.0% 000
000.0% 000
000.0% 000
000.0% 000
000.0% 000
Enter
" icon can be manually
functions
Enter
9