Table of Contents
Advertisement
7.1 Navigation in the Menu
Using the buttons, and this can be simply and easily set the address code and function code.
If you view or modify the lighting feature set, then press ENTER button, the display will enter the menu
interface. Both there is sub menu corresponding to the functional operation of the main menu. Each of the
menus is representative of the specific features of the lamp. The specific contents shows as the table
menu below.
Set or browse lighting function, press UP or DOWN button.
Press ENTER to save your changes or enter the submenu.Press the UP or DOWN can change the nume-
rical (increase or decrease in value).
Press the MODE button to return to menu.
7.2 Display Operation
-When the power on, if the display is flashing, it indicates that the DMX signal connection is unnormal.
If there is a channel failure in the reset process, the LCD screen will display the corresponding fault info-
rmation, can be compared to the information content of the lamp to be amended, if in doubt, consult the re-
levant technical personnel. - (Error List)
CODE #
ERRO INFO
Spi Err
Prg Err
BD1 Err
BD2 Err
UID Err
P1 Err
Focs Err
Zoom Err
STGo Err
Colo Err
Rgc Err
Rt Err
The following blank。
6.Dimension
7.Display control
Check the welding of memory IC
Upgrade again
Check main cable ABAB（485） chip
Enter again
Check cable of sensor, distance and location of ,magnets and sensor
单位：（mm)
CHECK MEASURMENT
- 7 -
Note
RESET
ERROR
Advertisement
Table of Contents
