Jeio tech OV-11 Service Manual page 20

Classification
Display Display error
1. Replace a new Temp. Sensor.
Check point
If display is OK, the previous Sensor is out of order
- Replace a temp sensor.
1. "2-1-1. Side Cover panel disassembly" Reference
Solution
2. "2-1-10. Temperature control Sensor disassembly" Reference
3. The assembly is reverse order of disjointing.
Classification
Display Display error
1. Check the bolts of Temp. Sensor on the Main control board.
If you detect bolting is loose, contact error
Check point
- Fasten the bolts of Temp. Sensor on the Main control board.
1. "2-1-1. Side Cover panel disassembly" Reference
Solution
2. Fasten the blots of Temp. Sensor on the Main control board
3. The assembly is reverse order of disjointing.
Symptom
Symptom
- 20 -
Service Factor
Temp Sensor error
Service Factor
Temp. sensor contact error