ProLights ECLFRJPTW User Manual page 8

6 ECLFRJPTW
CONTROL
• Protocols: DMX512, RDM, local knob
• DMX channels:1 / 2 / 5 - 1 / 5 - 2 / 7 / 9 / 12 / 13 / 16 / 19 / 21 channel
• RDM: RDM ready for fixture remote monitor and settings
• Display: black OLED high resolution display
• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
• Other: 16bit control of dimmer and colour
ELECTRONICS
• Dimmer: linear 0 ~ 100% electronic dimmer
• Dimmer curves:4 different dimming curves available
• Strobe / shutter:1 - 30 Hz, electronic
• Flicker: flicker free frequency with adjustable PWM
• Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
• Power supply: 100-240 V – 50/60 Hz
• Power consumption (at 230 V):107 W
• Power consumption (at 120 V):111 W
• Output (at 230 V):23 units on a single power line
• Output (at 120 V):12 units on a single power line
• Power factor:pF 0,99 @120 V - pF 0,95 @230 V
BATTERY
• Battery:24 - 34 V 4400 mAh (optional) external battery
• Re-charge connection: XLR 4p
PHYSICAL
• Cooling: combination of heat pipe cooling system and low noise fan
• Sospension and fixing: hanging bracket suitable for safe hanging and positioning
• Signal connection: Amphenol XLR 5p IN/OUT connectors
• Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
• IP rating:20
• Dimensions (WxHxD):297x497x260 mm
• Weight: 7.6 kg
Technical drawing Fig.1