Vision Fitness X6600HRT Assembly Manual page 5

ORANGE BAG
1
STEP
• Place the rubber console mast boot
on the end of the console mast.
• Connect the wire tie that exits the
bottom of the console mast to the wire
harness that sits in the bracket at the top
of the frame. Pull the wire tie and wire
harness up through the console mast
while at the same time inserting the
console mast into the frame bracket.
• Secure the console mast to the frame
with two capscrews (M10 x 70L).
Tighten with the 8 L-shaped Allen
MM
wrench.
• Stabilize the console mast to the
frame with the socket head screw
(M8x80L). Tighten with the 10
MM
L-shaped Allen wrench.
1
STEP
• Slide the rubber boot down the
console mast and snap it in place so
it integrates with the side covers.
5