Vision Fitness X6600HRT Assembly Manual page 6

BLUE BAG
2
STEP
• Place a wavy washer
(M20x30x1.5t) on the axle located
under the foot plate of the right lower
link arm.
• Slide the axle of the lower link arm
into the bracket located on the top of
the right pedal arm. Secure lower link
arm by attaching the pedal support
bracket and screw (M8x15L) to the
end of the axle. Secure the outside
holes in the bracket to the footplate
with two screws (M8x10L). Tighten
screws with the 5 T-handled Allen
MM
wrench.
• Repeat the same steps on the left
side.
2
STEP
6