X 6 6 0 0 H R T elliptical trainer To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding though, find your new Elliptical Trainer’s serial number located below the power switch, and enter here: Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records.
TOOLS & PARTS INCLUDED Allen Wrench Screwdriver PARTS BOX Lower Handlebar Rubber Boot, Qty: 2 • Console Mast Cover Plate, Qty: 1 Console, Qty: 1 • Power Supply, Qty: 1 • Water Bottle & Bracket, Qty: 1 Heart Rate Chest Strap, Qty: 1 • Parts Bags Owner’s Guide •...
Page 4
HARDWARE INCLUDED ORANGE BAG BLUE BAG M8 x 20 Bolt Quantity: 8 M4 x 15 Screw Quantity: 4 M8 Arc Washer Quantity: 4 M3 x 10 Screw Quantity: 1 M8 x 75 Bolt Quantity: 2...
Page 5
ORANGE BAG STEP • Remove the console mast cover from the frame. STEP • Slide the console mast cover onto the console mast. • Unfold the console cable and attach it to the string located inside the console mast. Guide the wire up through the mast while simultaneously sliding the console mast onto the frame bracket.
Page 6
BLUE BAG STEP STEP • Mount the lower left handlebar to the frame tube using two bolts (M8 x 20 ) and two arc washers (M8). Now slide the rubber boot all the way down over the handlebar. BLUE BAG STEP •...
Page 7
BLUE BAG STEP STEP • Mount the lower right handlebar to the frame tube using two bolts (M8 x 20 ) and two arc washers (M8). Now slide the rubber boot all the way down over the handlebar. BLUE BAG STEP STEP •...
Page 8
621-D East Lake Street • P.O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com 2001 Vision Fitness. All Rights Reserved. 3.01 Part #Z66EPO5-AG1805PRD AG18.05PRD REV2...
Need help?
Do you have a question about the X6600HRT and is the answer not in the manual?
Questions and answers