Slider Positioning; Replacement Of The Cable Glands Plate With The Stainless Steel Plate Supplied - Videotec HGV Instruction Manual

Extra-large sized housing

Hide thumbs Also See for HGV:

Table of Contents

Available languages

Enlarged version

6.5.2 Slider positioning

Shift the inner slide with lens and camera already

fastened into the wanted position and secure it by

means of the washers and screws provided.

Fig. 12

6.6 Replacement of the cable

glands plate with the stainless

steel plate supplied

Perforate according to the plate supplied.

Fig. 13

Useful perforation area.

Replace the standard plate by unscrewing the

fastening screws.

MNVCHGV_1702_EN

120 mm

Fig. 14

Place the gasket between the new plate and the

housing.

Fig. 15

Block the new plate using the fastening screws (Fig.

14, page 9).

Table of Contents

Table of Contents