Installation And Cabling Diagram (For Cars Without An On-Board Monitor Radio Only) - BMW 65 12 0 137 916 Installation Instructions Manual

9. Installation and cabling diagram
(for cars without an on-board monitor radio only)
0
Install the power supply cable A and the CD changer connection cable C as shown in the figure
and secure them to the audio wiring harness with cable ties.
When installing the power supply cable A start with branches A1 and A2.
Branch A1 to the radio connection plug X18126 on the radio at the front
Branch A2 to the retrofit plug X322 behind the heating / air conditioning control
Branch A3 to the earth post X13016 to the left side wall in the passenger compartment
Branch A4 to the CD changer (1) in the boot
Branches C1-C3 to the radio at the front
Branch C4 to the CD changer (1) in the boot
Tie back any excess lengths.
Retrofit / Installation kit No. 65 12 137 916 (others see cover sheet)
Installation Instructions No. 01 29 137 925
A1
A2
C1-C3
Issue date: 10.2001
A
A3
C
1
A4
C4
046 205 B
EN/13