Table of Contents
Advertisement
8.
Installation and cabling diagram
(for cars with an on-board monitor radio only)
0
Install the power supply cable A, the CD changer connection cable B and the CD changer
adapter cable D as shown in the figure and secure them to the audio wiring harness with cable
ties.
Cut the power support cable A before installing it (see sections 11 and 12).
Branches A1 and A2 to the on-board monitor radio connection plug X18126 on the left-hand
side of the boot
Branch A3 to the earth post X13016 to the left side wall in the passenger compartment
Branch A4 to the CD changer (1) in the boot
Branches B1 to B3 to the on-board monitor radio in the boot
In cars with an on-board monitor radio from production date 9/01 onwards, connect
branches B1 to B3 to branch D1 of the CD changer adapter cable D.
Branch B4 to the CD changer (1) in the boot
The CD changer D adapter cable is only required in cars with an on-board monitor radio
from production date 9/01 onwards.
Branch D1 to branches B1, B2 and B3 of the CD changer/on-board monitor radio connection
cable
Branch D2 to the new generation on-board monitor radio
Tie back any excess lengths.
Retrofit / Installation kit No. 65 12 137 916 (others see cover sheet)
Installation Instructions No. 01 29 137 925
A2
D
A3
D2
Issue date: 10.2001
A
A1
D1
B
B1-B3
A4
1
B4
046 0204 B
EN/12
Advertisement
Table of Contents
