BMW 65 12 0 137 916 Installation Instructions Manual page 17

11. To install the CD changer (for cars with an on-board monitor radio up to production
date 9/01 only)
10
8
B
22
V
1
A4/X18180
A
B
4 1
4
Retrofit / Installation kit No. 65 12 137 916 (others see cover sheet)
Installation Instructions No. 01 29 137 925
21
20
046 0212 B
21
22
20
046 0015 B
20
21
1
B4/X18729
046 0040 B
4
046 0308 B
Issue date: 10.2001
Connect the black 10-pin socket casing (8) on
0
the CD changer connection cable B to the black
17-pin socket casing (20) and secure it with
retaining clips (10).
Connect the black 17-pin socket casing (20) to the
17-pin plug casing (21) on the on-board monitor
radio.
Lay the CD changer connection cable B along the
audio wiring harness to the installation location of
the CD changer and secure it with cable ties.
Remove the three transport guard screws (20)
0
from the CD changer (1) and seal the apertures
with the adhesive discs supplied (adhesive discs
are supplied with the CD changer).
V
Remove the two covers (21) and set the
adjustment mechanism (22) with a straight slot
screwdriver to V (vertical installation) and then re-
affix both covers (21).
Connect branch A4, black 3-pin socket casing on
0
the power supply cable A or the standard power
supply plug X18180 to the plug casing on the
power supply connector (20) on the CD changer
(1).
Connect branch B4, black 6-pin socket casing on
the CD changer connection cable B or the
standard plug X18729 to the plug casing (21) on
the CD changer (1).
Insert the connected CD changer (1) into the shaft
0
opening and secure it with four Philips screws (4).
As you insert the component ensure that no
cables/leads are damaged.
EN/17