Changing Product Containers - Cornelius Energize 1 HC Series Operator's Manual

2. Turn the compressor switch (Fig. 6/1) to position "I".
3. Turn the carbonator pump switch (Fig. 6/3) to position "I".
4. Turn the circulation pump switch (Fig. 6/2) to position "I".
NOTICE!
Only turn the circulation pump switch to position "I" once the carbonator
pump is off.
4.2

Changing product containers

NOTICE!
When a product container is empty, this is indicated by soda only being dis-
pensed at the tower when a product is selected.
1. Undo the tube connection on the product container that needs changing.
2. Exchange the empty product container for a full one and remove the protective cap from
its connection.
NOTICE!
Do not mix up standard and light products as they are conveyed with differ-
ent CO
to tubes 1-5 and light products only to tube 6.
3. Connect the tube connection back onto the product container.
NOTICE!
If you would like to change another beverage, please inform your service
partner.
Cornelius Deutschland GmbH
Document no. TD1001000
Version 01/10/2019, Index 4
pressures. Therefore, only standard products may be connected
2
Operation
1 2
Fig. 6
Operator manual Undercounter cooler
Energize 1 HC
3
19