Cornelius Energize 1 HC Series Operator's Manual page 20

1. Check the water level gauge to make sure the water pan
is filled up with tap water.
Make sure the water level is between minimum and max-
imum.
If necessary, fill up the water bath with tap water.
2. Check that the CO
tion on the CO system.
2
If necessary, open the valve on the CO
3. Check the pressure-reducing valve on the CO
make sure CO pressure for carbonation is set as speci-
2
fied (for the setpoint, see chapter 3.3).
4. Only for types with CO
valve on the CO
2
is set as specified (for the setpoint, see chapter 3.3).
5. Check that the CO
If necessary, open the CO
6. Check that the water supply valve is open; see documentation on the water supply valve.
If necessary, open the water supply valve.
7. Check the pressure-reducing valve on the water pip to make sure the water pressure is
set as specified (for the setpoint, see chapter 3.3).
8. Check the fill level and the connection of the syrup containers and BIBs and replace the
empty containers with full ones; see chapter 4.2.
9. Check that the tower is fully operational; see the document "Tower operator manual".
Once the unit has been switched off and only then:
1. Plug the mains plug into the earthed socket, if applicable.
Operator manual Undercounter cooler
Energize 1 HC
18
bottle valve is open; see documenta-
2
-operated syrup pumps: Check the second pressure-reducing
2
bottle to make sure the CO
shut off valves are open; see documentation on the CO
2
shut off valves.
2
bottle.
2
bottle to
2
pressure for pressurising the syrup pumps
2
Operation
Fig. 4
system.
2
Fig. 5
Cornelius Deutschland GmbH
Document no. TD1001000
Version 01/10/2019, Index 4