Menu Structure; Auto Mode - ProLights UVPANEL18 User Manual

8

3.3 MENU STRUCTURE

3.4 AUTO MODE

If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows P--.
• Press the button UP/DOWN to switch between the programs P1 - P3, then press the button ENTER.
The unit will operate in automatic mode.
NOTE - Programs P1 - P3 are fully pre-programmed and will not be altered.
You can set the speed of execution of automated programs.
• Press the button MENU so many times until the display shows S--.
• Using the button UP/DOWN, select the desired run speed (slow-fast) S1 - S100.
• Press the button ENTER to confirm.
UVPANEL18
MENU
ð
1 2-CH
ð
2 5-CH
ð
3 P--
ð
4 S--
ð
5 dIM
6 Snd
ð
7 SenS
ð
8 U--
d 1
d512
d 1
d512
P1
P2
P3
S 1
...
S100
OFF
dIM1
dIM2
dIM3
u 0
...
u100
d 0
...
d255
S 0
...
S255