Introduction; Description; Technical Specifications - ProLights UVPANEL18 User Manual

4

- 1 - INTRODUCTION

1.1 DESCRIPTION

UVPANEL18 is an high-power UV LED batten equipped with 18 LEDs of 3W each, conceived to replace the
traditional fixtures based on UV lamps. UVPANEL18 is a flexible and user friendly projector, controllable in
DMX or through the AUTO and master/slave modes.

1.2 TECHNICAL SPECIFICATIONS

Light source and optics
• 18 x 3W UV LED
• Wavelenght: 390-400nm
• Beam angle: 20°
• LEDs average life span: >50'000h
Electronics and features
• Control Panel with LED display (4-digits)
• Several DMX selectable configurations (2, 5channels) for basic controlling:
- 2 channels: Purple, Strobe
- 5 channels: Purple, Strobe, Auto Programs, Auto Speed, Dimmer Mode
• DMX512 control protocol supported
• Dimmer curve settings: 4 selectable configurations
• Auto Mode: built-in programs with execution speed adjustment
• Manual Mode with selectable dimmer and strobe level
• Sound mode: music activation through internal microphone, sensitivity control
• Master/Slave mode: for synchronized operation of more units linked in a chain
• Linear and "stepless" transition between DMX values
• Flicker free operations (400Hz)
Structure and Power supply
• Sturdy die-cast aluminum, internal protection: IP30
• Silent operations, due to natural cooling of the peculiar chassis and to absence of fans
• Power unit: 100-240V 50/60Hz
• IN / OUT wiring signal and power connections through XLR3p/VDE
• Average power consumption: 44,8W
• Weight: 4,1 kg
• Dimensions (WxHxD): 389x197x187 mm
UVPANEL18