Table of Contents
Advertisement
Instructions for use
"Power management" (Function where it is available)
Thanks to the "Power management" function, the user can set the maximum power the hob can reach, as
required.
This setting is possible at any time and is maintained until the next change.
By setting the required maximum power, the hob automatically adjusts distribution in the various cooking
zones, ensuring that this limit is never exceeded; with the advantage of also being able to manage all the
zones simultaneously, but without overload problems.
4 maximum power levels are available and showed on display: 2.5 – 4.0 – 6.0 – 7.2 kW (7.2 kW is considered
as max power of cooktop) At the time of purchase, the hob is set to maximum power After plugging the
appliance into the electrical socket, in the first 60 seconds it is possible to set the required power level by
running the following points:
Step
1
2
3
4
In case of an error when setting the power, the symbol
sounds for about 5 seconds. In this case repeat the configuration procedure from the beginning. If the
error occurs again, contact the After-Sales Service.
During normal use, if the user tries to increase the maximum available power level when reached, the level
of the zone in use flashes twice and an acoustic signal sounds.
To obtain a higher power in that zone, it is necessary to manually decrease the power level of one or more
already active cooking zones.
Activation/deactivation of the acoustic signal
After switching the hob on, press and hold the "-" of the first cooking zone and the external button on the
right simultaneously for at least five seconds ("as shown below").
Control Panel
Press for approximately 3 seconds
both Power management button
(step 1)
Press the Power Management
button (step 2) to confirm the
previous step
Press to set the chosen level
amongst the different options
available
Press the Power Management
button (step 4) to confirm the
previous step
The display shows
The light comes on together with the in-use
lights for the individual cooking zones
The display shows the set level which flashes
for approximately 2 seconds; after which the
hob emits an acoustic signal and then turns
itself off; it is now ready for use
EE
appears in the middle and an acoustic signal
14
Display
PL
Advertisement
Table of Contents
