Table of Contents
Advertisement
Instructions for use
Timer
The timer can be used to set the cooking time for a maximum of 99 minutes (1 hour and
39 minutes) for all the cooking zones.
Select the cooking zone to be used with the timer, press the timer and a beep signals the function
(see figure). The display shows "00" and the LED indication comes on. The Timer value can be decreased
and increased by keeping the slider function "+" and "-" buttons pressed. When the set time has elapsed, an
acoustic signal sounds and the cooking zone switches off automatically. To deactivate the timer, keep the
Timer button pressed for at least 3 seconds.
To set the timer for another zone, repeat the above steps. The timer display always shows the timer for the
selected zone or the shortest timer.
To modify or deactivate the timer, press the cooking zone selection button for the timer in question.
Control panel warnings.
Special functions (If available)
Some models have special functions:
Multifunction key
This key allows you to select the simmering, melting or keep warm function with a specific cooking zone.
After selecting the zone, press the
each cooking zone indicates the automatic function selected. Press the
required function.
Simmering
After bringing to the boil, press the key
keep the pot simmering. "A" appears on the display: the indicator light lights up. To deactivate the function,
simply press
button.
Keep Warm
Identifies a power level that is suitable for keeping meals warm. After positioning the pot/accessory on the
chosen cooking zone, switch on the hob and select the cooking zone. Press the
select the function. To deactivate the function, simply press
The hob is fitted with a residual heat indicator for each cooking zone. These indicators alert the user
when cooking zones are still hot. If the display shows
heat indicator of a given cooking zone is lit, that zone can be used, for example, to keep a dish warm or to
melt butter. When the cooking zone cools down, the display goes off.
Incorrect or missing pot indicator.
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions
for your induction hob, the message "no pot" will appear in the display (see figure at side). If no pot is
detected within 60 seconds, the hob switches off.
Fast boil function (Booster)
This function, only present on some cooking zones, makes it possible to exploit the hob's maximum power
(for example to bring water to the boil very quickly).
To activate the function, press the "+" button until "P" appears on the display. After 10 minutes' use of the
booster function, the appliance automatically sets the zone to level 9.
key; the indicator light near the special function symbols next to
and the hob will automatically set the correct power level to
H
13
key repeatedly to set the
on the slide touchscreen.
, the cooking zone is still hot. If the residual
key repeatedly to
Advertisement
Table of Contents
