3 1/2 2A Mini Digital Clamp Meter user manual
MEASURING AC VOLTAGE
1. SAFETY INFORMATION
Beware of Electrocution
Pay special attention to avoid electric shock when
measuring high voltage. Do not input the voltage which
more than 600V rms AC.
1.
Plug the black test lead into the COM jack and the red
test lead into the V/Ω Jack.
2.
Set the rotary selector to V~ position to make the meter
get into AC V range.
3.
Connect the test leads to the voltage source or load
terminals for measurement.
4.
Take the reading on the LCD.
MEASURING DC VOLTAGE
Beware of Electrocution
Pay special attention to avoid electric shock when
measuring high voltage.
Do not input the voltage which more than 600V DC.
1)
Plug the black test lead into the COM jack and the red
test lead into the V/Ω Jack.
2)
Set the rotary selector to V
meter get into DC V range.
3)
Connect the test leads to the voltage source or load
terminals for measurement.
4)
Take the reading on the LCD.
MEASURING AC CURRENT
Beware of Electrocution.
Ensure that the test leads are disconnected from the
1)
Set the rotary selector to the A~2A/20A or 200A/400A
meter before making current clamp measurements.
WARNING
WARNING
position to make the
WARNING
8