Page 4
Display Screen explanation Low battery Automatic power-off mark Display wet bulb temperature or dew-point temperature Temperature measurement unit Relative humidity measurement unit MEM, RAM position number Max-min Hold function activated. The screen freezes the current reading Operation Notice When moving the meter from one atmosphere with extreme temperature or humidity to another, you need to wait for it to stabilize.
Page 5
Dew-point & Wet-bulb When starting the meter, the ambient temperature appears on the screen. To obtain DP, press a first time and press for a second time, WB is switched. Press a third time, to get the ambient temperature back. A corresponding signal will be shown on the screen indicating DP and WB.
Page 6
Press to start the backlight, press again to turn off the backlight. If starting without automatic power-off, it will close after 15 seconds. Maintenance Replace the batteries The meter is charged with four 1.5(AAA type) batteries. When appears, the batteries should be replaced as soon as possible. Follow the instructions: Unscrew the top of the entrance.
Page 7
Resolution:0.1% Update rate: 400ms Sensor’s type: High-precision digital sensor Range: -20 to 60°C (-4 to 140°F) Precision : ±1°C(0 to 45°C)/±1.5°C(-20 to 0°C,45 to 60°C) Resolution: 0.1°C/°F Update rate: 400ms Range: -50 to 60°C (-58 to 140°F) Precision : ±1°C(0 to 45°C/±1.5°C(-50 to 0°C,45 to 60°C) Resolution: 0.1°C/°F Update rate: 400ms RAM: 99 data point...
Need help?
Do you have a question about the MT-4616 and is the answer not in the manual?
Questions and answers