Solid-State Drive; Removing The M.2 2280 Solid-State Drive - Ssd-1; Installing The M.2 2280 Solid-State Drive - Ssd-1 - Dell Vostro 7500 Service Manual

Next steps
1. Connect the battery.
2. Install the base cover.
3. Follow the procedure in

Solid-state drive

Removing the M.2 2280 solid-state drive - SSD-1

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Disconnect the battery
About this task
The figure indicates the location of the solid-state drive and provides a visual representation of the removal procedure of M.2 2280 SSD
from slot 1.
Steps
1. Remove the single screw (M2x3) that secures the solid-state drive module shield to the palm-rest and keyboard assembly.
2. Lift and remove the solid-state drive module shield from the solid-state drive slot.
3. Slide and remove the solid-state drive module from the solid-state drive slot.

Installing the M.2 2280 solid-state drive - SSD-1

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the solid-state drive bracket and provides a visual representation of the bracket alignment procedure
to accommodate the M.2 2280 solid-state drive in slot 1.
after working inside your computer.
before working inside your
.
computer.
Disassembly and reassembly 23