DC-in port
Removing the DC-in port
Prerequisites
1. Follow the procedure in
before working inside your
computer.
2. Remove the
base
cover.
3. Remove the battery.
About this task
The figure indicates the location of the DC-in port and provides a visual representation of the removal procedure.
Steps
1. Remove the two screws (M2.5x5) and (M2.5x4) that secure the left display hinge to the palm-rest and keyboard assembly.
2. Open the left display hinge at an angle of 90 degrees.
3. Disconnect the DC-in port cable from the system board.
4. Remove the single screw (M2x3) that secures the DC-in port to the palm-rest and keyboard assembly.
Disassembly and reassembly
47